Action and J&B Truck Parts and Equipment are proud to offer parts from the following manufactures. We can, however, get parts from most crane manufactures if you need a part you don't see below.
Find out how you can add cranes to your upfit or get a crane body upfitted on Action's Website.

Venturo

Ultra Bright 6″ Boom-Tip Worklight
6 Inch by 5 Inch Ultra Bright Rectangular LED Clear Flood Light has a die-cast aluminum body and impact-resistant polycarbonate lens. It features 15 high-intensity LEDs that pump out 9000 lumens of light over a 207-meter area.  Light automatically adjusts to the angle of the load.

Venturo® E-Z Sto™
Safely store your load block/hook to the C-hook under the boom of the crane.  Hook safely slides off when the boom is at 60° angle.  Saves operators back injuries.

Pumps
Venturo offers variations of pumps for your HT Service Cranes

Bulkhead Mount Reservoirs
Reservoirs include a 100-mesh suction screen, 10-micron return filter, return and supply pressure gauges, sight glass, and breather cap.

Mounting Pedestals
Mounting pedestals are engineered solely for Venturo service cranes.  **NOTE** There is an available 8″ High mounting pedestal (#20480) for the CT310KX and also fits the ET6K.  This is not recommended for the ET6K unless the service body has a telescopic roll top.

Service Crane Boom Rest
Designed and engineered for Venturo Service crane boom structures to sit nicely into the harness.  **NOTE** Boom rests for smaller ET cranes include a hook latch for lower-sitting cranes that do not have an open C-hook on the underside of the boom.

Mounting Sockets
Mounting sockets are available for CT2000 series cranes only.  The sockets include a “recessed” and “pedestal” design for varied mounting on flatbeds, service beds or pickup beds.

Radio & Pendant Controllers
Venturo offers Wireless-Radio Remotes for all Venturo service cranes.  Pendant, corded controllers are standard with all models.  VLC Controllers are standard, wireless with all VLC capable hydraulic cranes.

Circuit Breaker Kits
Venturo offers 150, 200 & 300 AMP Circuit Breaker kits for its Electric-Hydraulic, Electric-Light Duty and Van Cranes.

Engine Start/Stop & Throttle Controls (HT Cranes)
Includes pendant switches, wiring harness and relays to supply a 12 volt or ground signal to the engine compartment.  Does not include an auxiliary electric or vacuum speed controller. (Available only with Proportional Controls on Hydraulic Service Cranes)

Outriggers
Venturo offers manual and hydraulic outriggers with crosstube installation on our Venturo Crane Bodies. Outrigger Packages for Venturo HT Crane Bodies – All of the Outrigger Packages are available for Venturo HT Crane Bodies. All outriggers are recommended for certain cranes.

For more information about our parts, call our sales team at 800-330-1229 or fill out our contact form.

Buyer Products

7 Inch Cast Steel Removable Outrigger7 Inch Cast Steel Removable Outrigger
Accommodate wide and oversized loads on your trailer.
Right- and left-side options available.
Removable design helps reduce trailer weight and width.
Sturdy cast steel construction.
The 7 Inch Cast Steel Removable Outrigger from Buyers Products is ideal for accommodating wide and oversized loads on your flatbed trailer. It can be removed when not in use, reducing trailer weight and width. The sturdy cast steel outrigger comes in right- and left-side options and measures 7 in. by 14 in.

5208 Inch Forged Steel Outrigger
The capacity of 5,000 lb.
Forged carbon steel construction.
Three locking positions for flexibility.
Designed for wide and oversized loads.
Buyers Products 8 Inch Forged Steel Outrigger has a capacity of 5,000 lb and is designed to allow for indexing at 90° angles, with three locking positions. The outrigger features forged carbon steel construction and measures 8 in. by 12-1/2 in. Both upper and lower mounting brackets are included.

8-1/4 Inch Ductile Iron Outrigger8-1/4 Inch Ductile Iron Outrigger
Increase trailer width by up to a foot more to handle wide loads.
The capacity of 5,000 lb.
Strong cast iron construction.
Buyers Products 8-1/4 Inch Ductile Iron Outrigger increases your flatbed trailer's width to accommodate wide loads. It is constructed from 100-70-03 cast ductile iron. The outrigger measures 8-1/4 in. by 12-1/4 in. Brackets for holding the outrigger (sold separately) can be welded to either the flange or the web of your trailer's beam.
Outrigger Pads your choice of Natural Hardwood, Rubber, or High-Density Polyethylene.

For more information about our parts, call our sales team at 800-330-1229 or fill out our contact form.

UHMW Polyethylene Outrigger PadOutrigger Pads
UHMW Polyethylene Outrigger Pad
protects concrete, paved, and other surfaces. It's ideal for utility trucks, tree trimmers, cranes, fire trucks, and other heavy equipment vehicles. Made of ultra durable UHMW polyethylene, it is a lightweight alternative to rubber. The pad features an easy to grab rope-style handle. It is available in both 18 in. by 18 in. by 1 in. and 24 in. by 24 in. by 24 in. sizes.

For more information about our parts, call our sales team at 800-330-1229 or fill out our contact form.

24 Inch Rubber Outrigger Pad protects concrete, paved, and other surfaces. I24 Inch Rubber Outrigger Pad
protects concrete, paved, and other surfaces. It is ideal for utility trucks, tree trimmers, cranes, fire trucks, and other heavy equipment vehicles, on and off-road. A solid 2 in. thick rubber pad features a textured surface and built-in handle. It measures 24 in. by 24 in or 18 in. by 18 in.

For more information about our parts, call our sales team at 800-330-1229 or fill out our contact form.

Poly Outrigger Pad1 or 1-1/2 Inch Thick Poly Outrigger Pad
Made of durable HDPE high-density polyethylene, it is a lightweight alternative to rubber. The pad features an easy to grab rope-style handle. Each package contains two pads. Pads are available in 18 in. by 18 in. and 24 in. by 24 in. sizes to meet your needs. They are sold in pairs but priced individually.

For more information about our parts, call our sales team at 800-330-1229 or fill out our contact form.

The Rubber Outrigger Pad from Buyers Products protects concrete, paved, and other surfaces.Rubber Outrigger Pad
The Rubber Outrigger Pad from Buyers Products protects concrete, paved, and other surfaces. It is ideal for utility trucks, tree trimmers, cranes, fire trucks, and other heavy equipment vehicles, on and off road. The solid 2 in. thick 18 in. by 18 in. rubber pad features a textured surface and built-in handle.

For more information about our parts, call our sales team at 800-330-1229 or fill out our contact form.

Hardwood Outrigger Pad protects concrete, paved, and other surfaces. Hardwood Outrigger Pad
protects concrete, paved, and other surfaces. It is ideal for utility trucks, tree trimmers, cranes, fire trucks, and other heavy equipment vehicles. The pad is constructed of natural hardwood in a floating design that helps avoid cracking and breaking under pressure. Measuring 18 in. by 18 in., the pad is a full 2 in. thick and features a generously sized handle for gloved hands. Pads are sold individually.

For more information about our parts, call our sales team at 800-330-1229 or fill out our contact form.

Liftmoore

Outrigger Manifold AssemblyOutrigger
Outriggers or a jackstand are required for any application. A removable jackstand is sufficient for the smaller cranes but you will need a set of outriggers on the larger units for the vehicle to pass the required stability test dictated by J765 which is part of OSHA 1910.180.
Key Benefits
Keeps truck level when heavy loads are lifted.
Configurations to fit most any application.
All Outriggers are complete with Control Valves.
Used to meet the Stability requirements of OSHA 1910.180 as specified by SAE J765

For more information about our parts, call our sales team at 800-330-1229 or fill out our contact form.

Accessories
Boom Rests
Designed for each model. Designed so that the Boom stores in a horizontal position.
Pedestals-For Flat Bed Mounting
Designed to match the mounting requirements of the crane.
Mounting Plates
Mounting plates are for welding onto the truck body. They are fabricated to fit under the crane matching the bolt pattern and cutouts needed.

For more information about our parts, call our sales team at 800-330-1229 or fill out our contact form.